High strength and high modulus PE short fiber specification: 5mm-65mm

High strength and high modulus PE short fiber is one of the three high-performance fibers in the world today (carbon fiber, aramid fiber, and high strength and high wear polyethylene fiber), and it is also the highest strength fiber in the world. Its basic characteristics are

High strength: More than 10 times stronger than high-quality steel

High wear capacity: second only to premium carbon fiber

Low density: less than 1, able to float on the water surface

The physical properties of High strength and high modulus PE short fiber are very excellent. Due to its high crystallinity and absence of chemical groups that are prone to react with chemicals, it is resistant to water, moisture, chemical corrosion, and ultraviolet radiation (therefore, it does not require UV pretreatment)

High strength and high modulus PE short fiber is one of the world's three major high-performance fibers (carbon fiber, aramid and High strength and high modulus PE short fiber), but also the world's highest strength fiber, its basic characteristics are high strength: strength is more than 10 times that of high-quality steel; High modulus: second only to extra grade carbon fiber; Low density: less than 1, can float on water. High strength and high modulus polyethylene fiber has excellent physical properties. Due to its high degree of crystallization, and does not contain chemical groups that are easy to react with chemical agents, it is resistant to water, moisture, chemical corrosion, ultraviolet (so it is not necessary to undergo UV resistance pretreatment), corrosion resistance, acid and alkali resistance (high strength and high modulus polyethylene has excellent wear resistance, not only has high modulus, but also soft, and has a long flexural life. The melting point of high-strength high-modulus polyethylene is between 144 and 152 ° C, and the strength and wear amount decrease with the increase of temperature, but under the condition of below 0 ° C, there is little change, and there is no embrittlement point at -150 ° C, so between -150 ° C and 70 ° C, a short time exposure to 110 ° C environment will not cause serious performance reduction.

Based on the excellent performance of High strength and high modulus PE short fiber, the fiber has become a flourishing high-tech material in the 21st century in the world, and is widely used in security protection, aviation, aerospace, navigation, electronics, weapons, shipbuilding, building materials, sports, medical and other fields. Such as bulletproof vests, bulletproof armored vehicles, shields, tanks and ships armored protective plates, parachute cables, Marine engineering cables, climbing ropes, fishing nets, fishing line racing boats, sailing boats, bowstrings, tennis rackets, skis, artificial joints and ligaments, safety shields, impact containers, etc. It is believed that with the continuous development and popularization of this technology, High strength and high modulus PE short fiber will also be used in a wider range of fields.

Yancheng Xiangsheng Carbon Fiber Technology Co., Ltd. specializes in the production of carbon fiber filament, cut carbon fiber, carbon fiber powder, loose carbon fiber, conductive carbon fiber, carbon fiber short fiber, armixed fiber, high strength and high modulus polyethylene short fiber, polyacrylonitrile engineering fiber, fiber cutting machine, fiber cutting machine, polypropylene short fiber, polyester engineering fiber, polypropylene engineering fiber.